Vision3 Lighting

Architectural Lighting Solutions

Vision3 Lighting manufactures the highest quality landscape and exterior architectural lighting products for the specification-grade lighting industry. All of our products are manufactured at our bronze casting foundry, CNC machining division and painting and assembly facilities located in the central valley of California. Our lighting products are proudly labeled "Made in U.S.A.".

  • Increase font size
  • Default font size
  • Decrease font size
Home Products In Ground Model IG6 LED
Model IG6 LED
Model IG6 LED

Model IG6 LED

Category: 120/277V Models

 120V 17W LED • 100-277V 20W LED 

 APPLICATIONS 

Landscape

Precision cast and machined LED lighting fixture with 120V or 100-277V input integral driver. Rugged cast bronze construction is suitable for the most corrosive of environments and is designed for in ground mounted up lighting in wet location landscape applications.

 FEATURES 

  • IP68 rated. Optional pour collar is suitable for concrete pour applications. Drive-over rated.
  • Faceplates available in three metal choices and eight styles with tamper-proof, captive screws.
  • Replaceable tempered 1/4” thick glass lens and silicone lens gasket.
  • One tool aiming that provides hot-aiming convenience.
  • Quick disconnects on all wiring connections for easy installation and maintenance.
  • LED drivers utilize patented LEDSense® thermal management to keep LED running at the optimum temperature.

 CONSTRUCTION 

Housing: 9" deep cast bronze housing. Optional concrete pour collar available. Four 3/4" NPT conduit entries for side or bottom conduit connections. Water-tight pass-thru from wiring compartment to lamp compartment. All stainless steel hardware.

Finishes: 14 standard powder coat finishes, 2 bronze finishes, 3 brass finishes & 3 stainless steel finishes. See FINISHES (click link).

Faceplate: Various faceplates available in cast bronze, machined brass, & machined stainless steel (material varies by faceplate style). Attaches using 6 stainless steel captive screws.

Lens/Seal: 1/4" thick tempered glass lens machined with stepped profile for flush mounting. Silicone gasket seal compresses around lens when faceplate is installed, creating a water tight seal. Lens and seal are both cleanable and replaceable. Optional Slip Reduction Lens increases wet lens friction by over 50%.

Aiming: Black anodized lamp module with integral accessory holder and stainless steel hardware provides up to 18° of vertical and 360° of rotational aiming. Lamp module design allows for one tool ‘hot’ aiming without having to touch LED module.

Lamp: LED module with integral driver, 2 input voltage options (120V or 100-277V), 4 beam patterns (15º, 23º, 35º, 51º), and push button selection of 4 light levels (100%, 80%, 55%, 18%). Lamp module uses quick disconnects for easy assembly. Lamp info: 17W / 20W LED Modules (click link).

Accessories: Up to 2 internal lens or shielding options can be specified.

Certification: CSA tested and certified to US and Canadian safety standards for use in wet locations.

 

See specification sheet, catalog page, and installation instruction PDF links above for more info. All features and ratings subject to change without notice.

csabug    us-flag

AddThis Social Bookmark Button